*Please allow 4 weeks for production and shipping.
From a few feet away you may think the Wilderness Premier Range Bag looks like many other range bags. Up to a point you might be right. It is rectangular with zippers and outside pockets. However, up close and personal you will see the difference between the WPRB and the "many others". This is a substantial bag whose heft and construction reflect it’s quality and durability. We guarantee this bag lives up to our motto: "OVERKILL NEVER FAILS”. While expensive, it is an investment in a bag that we custom-build for you to last a lifetime.
We started out looking at other range bags. There are a multitude of other choices from good to poor. One of them actually came apart while we scrutinized it. Had we thought they passed muster and were good enough, we would not have designed and made a range bag and you would not be reading this. Had we not chosen a different, more modular path, we would not have moved forward.
The total squared measure is just over 15-1/4" x 11-3/4". The two outside pockets are each 2-1/4" x 8" x 12-1/2". The main bodies of the outside pockets are padded and have YKK 10 zippers, while the envelope pockets sewn to them are not padded and have YKK 8 zippers. One of the main outside pockets has the zipper on three sides allowing it to open fully with loop pile sewn to the main body side and bottom to facilitate options. The other main outside pocket has a YKK 10 top zipper.
The main body internal size is just over 14-1/2" x 7" x 9". There is loop fastener on all four sides of the main body pocket to accept options. The top opening is a double-zipper configuration with the zippers positioned four inches apart running the full length if the bag. There are four 1" "D" rings positioned under the carry handles. The shoulder strap attachment points are double 2" "D" rings on each end to attach any snap hook shoulder strap or a strap with no hardware at all by feeding the ends through the "Ds" as you would with a belt.
The loop fastener fields on the inside of the main body and pockets allow the addition of a wide variety of modules, so you can truly tailor your bag to suit your needs and budget today or over time. These inserts also let you change the configuration of the bag instantly and repurpose the bag at any time. Numerous modules are available from the options selections above.
There is a strip of loop fastener on the 3-sided zippered outside pocket for I.D. or morale patches. On the top-opening panel there are two 4-way patches for attaching more gear using our optional 1" Utility Straps. The underside of this top-opening panel has more loop pile material sewn to it for patch storage or pouch attacment. When our optional key fob snaphook is attached to one of the bag's side double D-rings, you can secure the rolled up panel with its hook fastener panel.
Constructed from rugged and abrasion-resistant 500d Cordura nylon.
NOTE: You may see points on the bag where our multi-stitching shows. It may not be as neat looking as a single stitch, but it sure as hell is stronger. Don't be concerned about the multi-stitching damaging the material; we use only ballpoint needles which separates the fabric instead of cutting it.
*Only listed options are available to order; we are not doing customizations outside of these options.
**Photos show late prototypes and may not reflect minor changes to the final product. We reserve the right to modify our products and make improvements at any time that may not always be seen in product images or explicitly noted in product descriptions. Photos also show cases with optional additions above the base configuration.
***Optional modules shown are sold separately. Tools and other equipment showed for demonstration purposes and are not included.